TECH TIP #3:
Installing/Re-Installing the Dayton Toolbar

PROGRAM: Dayton on Disk 2000
OS: Windows
CAD SOFTWARE: AutoCAD2000, Mechanical Desktop 4.x, 5.x
PROBLEM: Dayton Toolbar is not visible or Dayton Toolbar displays 'Smiley Faces' instead of DaytonOnDisk2000 icons. This problem has been reported as occurring in a system that is running 'Striker' Die Design software inside of AutoCAD.

Assumptions:
DOD2000 path: c:\program files\DaytononDisk2000
ACAD2000 Path: c:\program files\ACAD2000\
The Dayton toolbar is currently loaded in ACAD (with smiley faces)
NOTE: If your paths differ, adjust procedure below accordingly.

Procedure:

1. Copy all .BMP files
   from the folder: C:\Program files\DaytononDisk\
   to the folder: C:\Program files\ACAD2000\
2. Delete the file: C:\program files\ACAD2000\Dayton_LOM.MNC
3. Execute the following commands inside AutoCAD
   a) Type "Menuload <ENTER>" at the AutoCAD prompt
   b) Click on the Dayton Menugroup
   c) Click "Unload"
   d) Click "Browse..."
   e) Select file: c:\program files\Acad2000\Dayton_LOM.MNS
   f) Click OPEN
   g) Click LOAD
   h) Click CLOSE
4. Right Click in AutoCAD's "open toolbar area". You should get a cursor menu listing ACAD, Dayton and any other loaded menu files...
5. Click Dayton---> DaytonOnDisk
6. The toolbar should now appear with the correct icons.