| |
DayTride®
nitride |
DayTride is a process where the
surface of the punch absorbs nitrogen as a result
of thermochemical treatment. Not only does this
process increase hardness, but adds to wear
resistance and corrosion resistance. Since
DayTride is a relatively low temperature process
a high degree of dimensional stability is
attained. |
| Alteration
Code: XN |
Approximate
hardness: RC73 |
| |
DAYTiN®
titanium nitride |
DAYTiN is an extremely hard
film coating using the PVD (physical vapor
deposition) process. It is the most common hard
coating in existence today. DAYTiN provides these
features:
- Extreme
hardness-as hard as carbide
- Excellent
lubricity
The high hardness
and low coefficient of friction reduce abrasion
and wear. DAYTiN is not inclined to stick to or
bond with most part materials. Punch point
cutting edges and wear surfaces provide excellent
wear resistance.
|
| Alteration Code: XNT |
Approximate
hardness: *Vickers 2300 |
| |
| DayKoteTM |
DayKote
is especially suited for metal forming and
extruding components where metal-on-metal wear is
encountered. The strong adhesion and dense
microstructure prevent flaking and cracking, even
under extreme compressive forces. |
| Alteration Code: XND |
Approximate hardness:
*Vickers 3000 |
| |
XCN
titanium carbonitride |
XCN
is very hard PVD thin film coating. It is
excellent for abrasive wear applications. It
provides a hardness superior to carbide while the
toughness of high speed still is maintained.
- Harder than
carbide
- Superior wear
resistance
|
| Alteration Code: XCN |
Approximate hardness: *Vickers
3000 |
| |
| MoST® |
MoST
is an exclusive PVD solid film lubricant coating,
available from Dayton Progress. It provides a
combination of lubricity and wear resistance not
available from other PVD or CVD techniques. MoST
is designed to produce a coefficient of friction
lower than other coatings. It is good for
stainless and spring steels. It works well on pre-painted,
coated and galvanized steel or other materials
where galling can be a problem. |
| Alteration Code: XNM |
Approximate hardness:
*Vickers 2000 minimum |
| MoST is a trademark of
IonBond® Inc. |
*Vickers
hardness is used when Rc exceeds 80
DayTride, DAYTiN, DayKote are trademarks of
Dayton Progress Corp |
