- Increase die clearance
- Use XSC slug control
- Reduce punch entry to .030"
- Jektole® Punches
- Reduce punch entry to .030"
- Reduce die clearance
Punch Wear & Galling | Punch Head Breakage | Problem Solver Guide
| Slug Pulling | |
|
|
| Slug Pulling | |
| Cause | Solution |
| Bellmouth Wear In Matrix |
|
| Punch Entry Too Deep |
|
| Excessive Die Clearance |
|
Punch Wear & Galling | Punch Head Breakage | Problem Solver Guide |
|
|
|